DMM DRAGON CAM - 1 - PURPLE - 2ND

DMM Dragon 2 1 Cam

A greater contact area with a raw aluminium finish and additional bite points are the hallmarks of our revolutionary TripleGrip cam lobes. These features combine to increase friction between the cam lobe and the rock. The result is increased holding power and reduced 'walking', particularly in slick or soft rock types and sub-optimal placements.

Single stem, dual axle design gives our Dragons 360 degree flexibility and the greatest expansion range, increasing both performance in sub optimal placements and your chance of getting the right piece first time.

The hot forged thumb press improves ergonomics while reducing the chance of a fumble from gloved hands or pumped fingers, while the extendable sling cuts down on quickdraws needed to extend placements, significantly reducing weight on your harness.

The Dragons low weight does not compromise its strength - they are rated to a huge 14kN from size 1 upward and the additional material in the lobes has improved their resistance to deformation.

DMM Dragon 2 1 Cam Features and Spec:

• TripleGrip cam lobes give increased holding power and torsional rigidity plus reduced 'walking'
• Dual axle, single stem design for 360 degree flexibility and a large expansion range.
• 14kn strength in sizes 1 and upwards
• Ergonomic, hot forged thumb press with extendable 8mm Dyneema sling
• 13.75 degree cam angle for high holding power
• Colour coded for easy identification
• Strength (active) - 14kn
• Strength (passive) - 14kn
• Weight - 103g
• Range - 20-33mm